ArmActiv Bulli Engine

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Volume – 190 ml, 385 ml.

Blends with any type of oil.

Composition: Mineral composition + carbon compounds + active substances, base oi.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads).
  • Antifriction (reduces friction loss).
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect

  • Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction;
  • Reduce the fuel consumption up to 10%;
  • Complete absence of wear at the time of "cold start";
  • Significantly reduce vibration and hence noise;
  • Reduce the toxicity of exhaust gases due to more complete combustion of fuel;
  • Optimization of gaps.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the engine heated to operating temperature;
  2. Fill the composition in the oil filler neck of the engine;
  3. After pouring the composition into the engine, start moving in the normal mode, providing a run of 15 - 25 km / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.

Attention!

  1. The engine must be in good condition;
  2. It is not allowed to pour the composition into the cold engine.

Packaging:

The vial volume is 190 ml, 385 ml.

The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).

 

ArmActiv Bulli Gear

Tribotechnical composition is designed to treat mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

Volume – 90 ml, 190 ml.

Blends with any type of oil.

Composition: Mineral composition + carbon compounds + active substances, base oil.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase gearbox parts life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement);
  • Reduce the fuel consumption up to 10%;
  • Significantly reduce vibration, and hence noise;
  • Improves the smoothness of the gearshifting;
  • Increases the coast-to-neutral.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils. Does not have a negative effect on rubber products.

Application (go to the instructions page)

Before use, shake the vial with the composition intensively.

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the gearbox heated to operating temperature;
  2. Fill the composition in the oil filler neck of the gearbox;
  3. After pouring the composition into the gearbox, start moving in the normal mode, providing a run of 15 - 25 km / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.

Attention!

  1. The gearbox must be in good condition.
  2. To achieve the greatest effect, it is recommended to perform simultaneous treatment of gearboxes, reduction gearboxes and bridges.

Packaging:

The vial volume is 90 ml, 190 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).

 

ArmActiv Bulli Trax

Tribotechnical composition is designed to treat transmissions (reduction gearboxes, bridges) to protect against wear, reduce friction and optimize work processes.

Volume – 90 ml, 190 ml.

Blends with any type of oil.

Composition: Mineral composition + carbon compounds + active substances, base oil.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase the transmission parts life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement);
  • Increase the run-out at neutral transmission;
  • Reduce the fuel consumption up to 10%;
  • Significantly reduce vibration and hence noise;
  • Reduce the temperature;
  • Optimize the gaps.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils. Does not have a negative effect on rubber products.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С.

  1. Pour the composition into the transmission heated to operating temperature;
  2. Fill the composition in the oil filler neck;
  3. After pouring the composition, start moving in the normal mode, providing a run of 15 - 25 km / 5 engine hour;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. The dosage of the composition and recommendations are given in the instructions;
  6. Strictly follow the instructions for use.

Attention!

  1. The transmission must be in good condition.
  2. To achieve the greatest effect, it is recommended to perform simultaneous treatment of gearboxes, reduction gearboxes and bridges.

Packaging:

The vial volume is 90 ml, 190 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С.

Shelf life: 5 years from the date of production (indicated on the vial).

ArmActiv Hydro

Tribotechnical composition is designed to treat hydraulic systems (hydraulic motors, hydraulic cylinders, pumps) of cars to protect against wear, reduce friction and optimize working processes.

Ideal for treating machinery that operates under conditions of severe dustiness.

Volume – 180 ml, 360 ml.

Blends with any type of hydraulic oil.

Composition: Mineral composition + carbon compounds + active substances, base oil

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

In the process of tribopolymerization, a coating is formed on the rubbing surfaces in the form of a spatial tribopolymer network, which is connected to the base by a single structure. This coating possesses high wear resistance and low friction coefficient, compensates for the wear of the parts surfaces, reduces their roughness and at the same time, being a spatial polymeric network, retains oil in their cells, thus providing a low-friction regime and a low coefficient of friction. That in aggregate provides a significant increase in service life.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase in hydraulic system transmission parts life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs (carbon nanoreinforcement) ;
  • Optimize the gaps;
  • Retain oil at the parts surface;
  • Restore the hydraulic system pressure to the nominal level;
  • Restore the tightness of the stuffing box seals;
  • Reduce the oil temperature;
  • Increase the service life of the oil.

It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of transmission oils.

Does not have a negative effect on industrial rubber products.

Application (go to the instructions page)

Before use, shake the bottle with the composition intensively.

The temperature of the composition should be approx. + 200С

  1. Pour the composition into the hydraulic system heated to operating temperature;
  2. Fill the composition in the oil filler neck;
  3. After pouring the composition, start working in the regular mode for at least 2-4 hours;
  4. The dosage of the composition and recommendations are given in the instructions;
  5. Strictly follow the instructions for use.

Attention!

Hydraulic system must not have mechanical damages and be operable.

Packaging: The bottle volume is 180 ml, 360 ml. The lid provides tightness and control of the first opening.

Storage conditions: -200С - +700С

Shelf life: 5 years from the date of production (indicated on the vial).

 

ArmActiv Bearing

Tribotechnical composition based on plastic lubricator is designed for treating rolling and sliding bearings to reduce friction, protect against wear and extend their service.

Volume - 70 gr, 380 gr.

Blends with any type of lubricators.

Composition: Mineral composition + carbon compounds + active substances, base lubricant.

Provides reliable protection against wear and tear by carbon nanoreinforcement technology.

Properties:

  • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
  • Antifriction (reduces friction loss);
  • Anti-wear (significantly reduces the wear of friction pairs).

Effect:

  • Increase the life of bearing parts up to 5 times due to the formation of a tribopolymer layer on the surface of friction pairs (nanocarbon reinforcement);
  • Reduce the friction;
  • Significantly reduce vibration and hence noise;
  • Reduce the temperature;
  • Optimize the gaps.

Application

Use as a normal grease lubricant.

Copyright © 2022 NPTK «ResTech» +7 812 679-7606 info@armactiv.ru
All rights reserved